Olympus Camedia C-50 ZOOM Reference Manual page 111

Troubleshooting
POSSIBLE CAUSES
The date recorded with the image data is wrong.
1 The date and time are
not set.
2 The camera has been
left for too long with the
battery removed.
The settings you made have returned to the factory default settings.
1 You turned off the
power without saving
the settings.
1 The flash is set to the
off mode .
2 The subject is bright
enough to shoot
without a flash.
3 Sequential shooting is
on.
4 You are recording
movies.
5 Panorama shooting is
set.
110
CORRECTIVE ACTION
1 Set the date and time. The
clock adjustment is not
factory-preset.
2 Set the date and time again.
1 Set ALL RESET to OFF.
The flash does not fire.
1 Press to select a flash
mode other than
2 Set the flash to Fill-In mode.
3 Set the drive mode to
(single-frame shooting).
4 Set the mode dial to a mode
other than
5 Cancel the Panorama
shooting.
.
.
REF. PAGE
P. 22
P. 22
P. 93
P. 50
P. 50
P. 59
P. 31
P. 66