Rear Panel Description - Numark HDCD1 User Manual

USB – Used to connect to your computer for loading and managing your collection of audio files. For your
convenience there is a USB jack on both the front panel and the rear of the unit. Only one can be used at
a time.
KEYBOARD – Used to connect a standard PS/2 keyboard, as supplied with the unit. There is another
keyboard jack on the rear of the unit. Only one jack can be used at a time.

Rear Panel Description

1. Control Cable Jacks – This is where the control cables are connected that allow
2. Line Outputs - For mixer or line level device connection.
3. Line Input - For recording external audio sources.
4. S/PDIF Digital Output - For S/PDIF digital device connection.
5. Optical Digital Output - For optical digital device connection.
6. USB Port - Located in front and rear, the USB ports are used to connect the
7. Keyboard connection - Front and rear to accommodate both rack mount
8. IEC power – The HDCD1 uses an auto-switching power supply that can handle
Numark HDCD1
the controller to communicate with the main unit.
HDCD1 to a computer for file transfer and file management. Only one port may be
used at a time. This is for convenience of portable or permanent hookup.
keyboard and temporary keyboard hookup. Only one keyboard may be used at a
time.
between 100 and 240 volts.
- 6 – User's Guide