Table of Contents
Advertisement
MX25
REAR PANEL FEATURES
15. Control Cable Connector- Plug in the 8-pin cable included in here to connect the remote control
and main CD unit together
16. IEC Power Plug Connector - Plug your supplied power cord in here.
17. Voltage Selector - Set this switch to the voltage for your location.
18. RCA Audio Connectors - Connect your CD player to your mixer from this line level output.
19. Digital Output - The format is type 2, form 1, also known as S/PDIF (Sony/Phillips Digital
Interface Format). In order to use the digital output you should not use variable pitch slider and
the pitch bend buttons. If you adjust the pitch, other devices may not read the digital output
properly because the sampling rate changes
©2001 Numark Industries
- The Leader in DJ Technology
- 8 -
http://www.numark.com
Advertisement
Table of Contents
