Installing Your Mcc 3100 For Blackberry; Installing Or Upgrading The Software - Nortel NN42030-101 User Manual

Installing your MCC 3100 for BlackBerry

This section contains the following topics:
• "Installing or upgrading the software" on page 19
• "Uninstalling MCC 3100 for BlackBerry" on page 27
• "Determining the software version" on page 28

Installing or upgrading the software

This section describes how to install or upgrade the Nortel Mobile
Communication Client 3100 (MCC 3100) for BlackBerry on a supported
BlackBerry device. You can install or upgrade the MCC 3100 in one of
three ways:
• Installing from a computer: Use this method to add the software to
your computer, connect your computer to your BlackBerry with a
universal serial bus (USB) cable, and then install the software by
using the Desktop Manager.
• Installing over the air: Use this method to open a Web browser on
your BlackBerry, access a Web site that lists the available software
load builds, and then select and install the appropriate software for
your particular device. This method requires that you purchase a
BlackBerry cellular data plan.
Note: Nortel recommends that you use the over the air method of
installation, because most of the installation steps are automated.
• Installing from the BlackBerry Enterprise Server (BES): Your system
administrator may request that you use this method. For information
on the BES install, see
BlackBerry using the BlackBerry Enterprise Server (BES)" on
page 23.
Use the following procedures to install or upgrade the MCC 3100 for
BlackBerry software:
• "Installing MCC 3100 for BlackBerry from a computer" on
page 20
Nortel Mobile Communication Client 3100 for BlackBerry User Guide
Installing your MCC 3100 for BlackBerry
"Installing or upgrading MCC 3100 for
19