Using The Oven - Smeg SOPA6102TS User Manual

To cancel the operation, hold down the
button on the display for a few
seconds.
Modifying the time
1. In the main menu, hold down the
button for a few seconds.
2. Modify the time as described in point 2 in
the previous chapter.
Low brightness
After 2 minutes of inactivity, the display shows
the button and the current time in low
brightness.
In this mode, the touch buttons on the control
panel are disabled (the lighting is off and there
is no reaction to touching).
The display only switches to low
brightness mode if there is no heat
inside the oven cavity.
Reactivating the display
To activate the display and the touch buttons on
the control panel:
• Hold down the
for about one second.
The display lights up and the touch buttons on
the control panel come on.
14 - USE
button on the display

Using the oven

See General safety instructions.
Traditional cooking
Cooking can be interrupted at any time
by pressing and holding the
button.
1. Use the and
select the desired function (e.g. "FAN-
ASSISTED
The button and the text
the display start flashing.
2 Press the and
set the desired temperature (e.g. "200°C").
3. Press the button to start the function.
When the door is opened, the function
in progress is interrupted.
The function resumes automatically
when the door is closed.
Preheating stage
Cooking itself is preceded by a preheating
stage, which allows the appliance to heat to the
cooking temperature more quickly.
This stage is indicated by the switching on of the
indicator light and by a progressive
increase in the temperature level reached
touch
touch buttons to
").
touch buttons to
91477A548/A
on