Alto L-16 User Manual page 19

- DIRECT OUTS
Each MONO MIC/LINE channel (CH1-CH8) is equipped the 1/4" phone socket for direct output. These jacks
are used to send the signal from the channel path to external device for recording function etc..
- SUBGROUPS OUT
These 1/4" phone sockets are used to connect the inputs of deck or available for a complicated PA live sound
system. You will find it is the best tool when you operate the SUBGROUPS OUT.
- SUBGROUPS INSERT
These 1/4" phone sockets are insert points. They are used to connect processors such as compressor, limiter,
EQ etc.. When insert external processor into these jacks, the subgroup stereo signal will be taken out, then
returned to before subgroups fader. Of course, these jacks used must be stereo (Tip Send/Ring Return).
58
59
60
18