Switching Off The Printer - AGFA Drystar 5500 User Manual

Switching off the printer

When you want to switch off the printer, it is recommended to follow the
procedure as described below, to make sure that any pending jobs are
correctly finished.
1. Make sure that the pending jobs are correctly finished. If necessary, follow
the procedure to stop printing.
2. Press the Power button to switch off the printer.
Note: In case the printer is ready, it shuts down immediately.
Otherwise it can take up to 10 seconds to power down.
Note: After switch off, the device is still in stand-by mode. To
remove the device from the mains supply disconnect the
mains plug.
Drystar 5500, Drystar 5503 | Introduction | 69
2901J EN 20191018 0826