Advertisement
2. First Use
To disable the IR light, short-press the POWER/IR button again. You will
notice that the IR light indicator on the screen is no longer showing.
Note:
The photos and videos taken while the IR LED is enabled will be
recorded in black and white.
The IR LED can also be enabled or disabled during a recording
2.12 Attaching External Accessories
This camcorder supports lens filters & attachments, external microphones and
assistive lighting utilizing power from the hot-shoe mount. When attaching an
external microphone, be sure to mount it to the hot-shoe mount and also insert
the 3.5mm plug into the MIC port.
37mm Diameter
Threading
2.13 Remote Control
Note: Before using the
remote, remove the
battery tab on the back.
When using the remote,
it should be pointed
towards the remote
control receiver on the
front the camcorder.
There should be no
objects in between the
remote and camcorder
as they can block the
signal transmission from
the remote to the
camcorder.
Zoom In
n
Zoom Out
t
IR Light
Mode
e
Up
p
Play/Stop
/
Rewind
11
.
V
Video
Pause
P
Photo
D
Delete
Volume Up
D
Down
F
Fast Forward
Volume Down
Advertisement
