Table of Contents
Advertisement
When the projector is on, press twice to switch the projector to standby.
6.
Keystone
"Using the menus" on page 30
Press this button to correct keystoning at the top of the projected image.
When the on-screen menu is activated, press this button to move the selection focus
left or make adjustments.
7.
SOURCE button (Refer to
mation)
Switches sequentially through input sources. (RGB/YPbPr, Video or S-Video).
8.
MENU /6Down button (Refer to
mation)
Turns on the On-Screen Display (OSD) menu.
When the on-screen menu is activated, press this button to move the selection focus
down.
9.
Focus ring (Refer to
more information)
Adjusts the focus of the projected image.
10.
LAMP indicator light (Refer to
Lights up or flashes when the projector lamp has developed a problem.
11.
MODE button (Refer to
information)
Selects one of the application modes.
12.
Keystone
"Using the menus" on page 30
Press this button to correct keystoning at the bottom of the projected image.
When the on-screen menu is activated, press this button to move the selection focus
right or make adjustments.
13.
AUTO button (Refer to
mation)
Press this button to let the projector automatically determine the best picture timings
for the projected image.
EN-10
/3Left button (Refer to
for more information)
"Switching input signal" on page 27
"Using the menus" on page 30
"Fine-tuning the image size and clarity" on page 25
"Illustration" on page 42
"Selecting an application mode" on page 26
/4Right button (Refer to
for more information)
"Auto-adjusting the image" on page 25
"Correcting keystone" on page 25
for more information)
"Correcting keystone" on page 25
and
for more infor-
for more infor-
for
for more
and
for more infor-
Advertisement
Table of Contents
