Switching Input Signal; Hiding The Image; Remote Paging Operations; Freezing The Image - Mitsubishi Electric XD90U User Manual

Switching input signal

The projector can be connected to multiple devices
at the same time. However, it can only display one
at a time. To cycle through the available input
sources, press the SOURCE button. A source
selection menu will display at the center of the
screen after you press the button.
The brightness level of the projected image will
change accordingly when you switch between
different input signals. Data (graphic) "PC"
presentations using mostly static images are
generally brighter than "Video" using mostly moving
images (movies).
The input type affects the options available for the Application Mode. See
application mode" on page 26

Hiding the image

In order to draw the audience's full attention to the
presenter, you can press the BLANK (or BLANK /
5Up) button to hide the screen image. Press the
button again to restore the image. The word
"BLANK" appears at the bottom right corner of the
screen while the image is hidden.
You can set the blank time in the
-> Blank Time
image automatically after a period of time when
there is no action taken on the blank screen.
Do not block the projection lens from projecting as this could cause the blocking object to
become heated and deformed or even cause a fire.

Remote paging operations

You can operate your display software program (on a connected PC)
which responds to page up/down commands (like Microsoft PowerPoint)
Page Up and Page Down on the remote control
by pressing
"Connecting a computer" on page 17
Connect the projector to your PC or notebook with a USB cable
prior to using this function.

Freezing the image

Press the Freeze button on the remote control to freeze the image.
An icon will display in the lower right corner of the screen. To
release the function, press the Freeze button on the remote control,
or the SOURCE button.
This does not remotely control the signal source. It just freezes the
currently projected image.
for details.
menu to let the projector return the
for details.
Advance -
. See
"Selecting an
EN-27