Table of Contents
Advertisement
Keystone
Keystone
•
Press the
Keystone, then press the
press the
•
Press the MENU/6Down button on the projector or the MENU button on the remote
control. Go to
Keystone
3Left or 4Right buttons on the remote control.
For example,
Keystone
Keystone
Automatic keystone correction
Your projector is equipped with Autokeystone function that corrects keystoning
automatically. See
Selecting an application mode
The projector is preset with several predefined application modes so that you can choose
one to suit your operating environment and input source picture type. To select a operation
mode that suits your need, press the MODE button. The application modes available for
different types of signals are shown below. See
PC Signal Input
Brightest
YPbPr / S-Video / Video Signal Input
Movie (default)
EN-26
/3Left button to correct keystoning at the top of the image. Press the
/4Right button to correct keystoning at the bottom of the image.
/
buttons on the remote control to display the status bar labelled
button to correct keystoning at the top of the image or
button to correct keystoning at the bottom of the image.
Picture --> Keystone and adjust the values by pressing the
/3Left or Keystone
1. Press the Keystone
the projector or
2. Press the
button on the remote control
or
3. Press the Keystone
the projector, or the3Left button on the
0
remote control when you are in the Picture
--> Keystone menu.
1. Press the Keystone
on the projector or
2. Press the
button on the remote
control or
3. Press the Keystone
on the projector, or the 4 Right button on
0
the remote control when you are in the
Picture --> Keystone menu.
"Autokeystone (On)" on page 31
Presentation
(default)
/4Right buttons on the projector, or the
/3Left button on
/3Left button on
/Right 4 button
/Right 4button
for details.
"Application Mode" on page 31
Photo
Gaming
Cinema
Photo
Keystone
-6
Keystone
+6
for details.
Video
Gaming
Advertisement
Table of Contents
