Table of Contents
Advertisement
Remote Control
Remote control description
1.
Power button (Refer to
for more information)
Turns the projector on or off.
When the projector is in standby, press once to turn the projector on.
When the projector is on, press twice to switch the projector to standby.
2.
Freeze button
The image is frozen when Freeze is pressed. An icon "
right corner of the screen. To release the function, press Freeze again or the Source
button.
5Up,6Down buttons (Refer to
3.
more information.)
3Left, 4Right buttons
4.
When the on-screen menu is activated, the Up/Down/Left/Right buttons are used as
directional arrows to select the desired menu items and to make adjustments.
5.
MENU button (Refer to
Turns on the On-Screen Display (OSD) menu.
6.
Keystone
information.)
Manually corrects distorted images resulting from an angled projection.
7.
Page Up and Down buttons
You can operate your display software program (on a connected PC) which responds to
page up/down commands (like Microsoft PowerPoint) by p
8.
AUTO button (Refer to
information.)
Automatically determines the best picture settings for the displayed image.
9.
SOURCE button (Refer to
mation)
Sequentially selects input sources. (RGB/YPbPr-> Video-> S-Video)
1
2
3
4
5
3
6
"Start up" on page 22
"Remote paging operations" on page 27
"Using the menus" on page 30
buttons (Refer to
"Correcting keystone" on page 25
"Auto-adjusting the image" on page 25
"Switching input signal" on page 27
7
8
9
10
11
"Shutdown" on page 28
and
" will display in the lower
for more information.)
ressing these buttons.
for more
for more infor-
for
for more
EN-11
Advertisement
Table of Contents
