Cursor Readouts; Cursor Accuracies ( Analog Mode); Cursor Accuracies (Digital Mode) - Fluke Autoranging CombiScope PM3370B Reference Manual

CHARACTERISTICS
CHARACTERISTICS
1.8.2

Cursor Readouts

CURSOR READOUTS
READOUT RESOLUTION
Note 1: In the "MTB + DTB timebase" and "DTB", all waveform operations and
measurements are performed on the DTB traces.
Note 2: Refer to trigger point (Q1, Q2)
Refer to start of trace (Trace in memory, Q1 and Q2).
Note 3: Gives time differences (delta) between the cursor position and the
trigger point (for both cursors).
1.8.3

Cursor Accuracies ( Analog Mode)

Voltage measurements
Manual
Time measurements
Unmagnified timebase
Magnified timebase
up to 10 ns/div
Magnified timebase in
5 ns/div and 2 ns/div
Note 1: Measured with 1 kHz square wave within central 6 div.
Note 2: within central 8 div.
1.8.4

Cursor Accuracies (Digital Mode)

ERROR LIMIT
VERTICAL
ERROR LIMIT
HORIZONTAL
SPECIFICATION
dV
dT
V to GND
1/dT
dQ(Q1, Q2)
T-trig
3 digits
±1% of FULL SCALE
±1% of FULL SCALE
±1.4% of FULL SCALE
±2.2% of FULL SCALE
See vertical accuracy
See horizontal accuracy
ADDITIONAL
INFORMATION
See Note 1
See Note 1
See Note 2
See Note 3
Note 1
Note 2
1 - 23