Battery Backup - Fluke Autoranging CombiScope PM3370B Reference Manual

CHARACTERISTICS
CHARACTERISTICS
ALLOWABLE POWER
INTERRUPTION
POWER CONSUMPTION
Without options
Max. power
consumption
POWER CORD
Length
Power plug
Note 1: At the lowest allowable source voltage. After this time the oscilloscope
data is saved before the instrument goes down, and an automatic power-
on sequence starts after restoration of the power source voltage.
1.15.2

Battery Backup

DATA AND SETTINGS
RETENTION
Retention time
Batteries:
Recommended type
Quantity
Temperature range
Note 1: When instrument is switched off or during power failure.
Note 2: According to IEC 285 (=Alkaline Manganese Penlight Battery).
Note 3: At -40 to 0 ° C, settings retention is uncertain. It is advised to remove
batteries from instrument when it is stored during longer periods
(>24 hours) below -30 ° C or above 60 ° C. UNDER NO
CIRCUMSTANCES SHOULD BATTERIES BE LEFT IN THE
INSTRUMENT AT TEMPERATURES BEYOND THE RATED RANGE
OF THE BATTERY SPECIFICATION
SPECIFICATION
20 ms
115W
130W
2.1m (82.7 in)
Nat.version
2 years
LR 6
2
0..+70 °C
ADDITIONAL
INFORMATION
See Note 1
See Note 1
See Note 2
See Note 3
1 - 35