Event Counter; Hold-Off - Fluke Autoranging CombiScope PM3370B Reference Manual

CHARACTERISTICS
CHARACTERISTICS

1.4 EVENT COUNTER

EVENT delay
PM3384B/94B
PM3370B/80B/90B
Event count
Event source
PM3384B/94B
PM3370B/80B/90B
Event slope selection
Event clock sensitivity
DC to 50 MHz
Event level
Max. count frequency
Note 1: In digital mode, triggered DTB in combination with Event is not possible

1.5 HOLD-OFF

HOLD OFF SETTING
A: Minimum
A: Maximum
D: Minimum
D: Maximum
Note 1: For total hold off time, the process time must be included. See also
ACQUISITION TIME.
SPECIFICATION
1 to 16384
CH1 to CH4
CH1, CH2, EXT TRIG
+ or -
0.5 div
8 div
50 MHz
2 µs or 3 divisions
of MTB setting
2s or 20 divisions
of MTB setting
4 ms
20 divisions of
MTB setting
ADDITIONAL
INFORMATION
In trigger modes EDGE
and LOGIC.
In trigger modes EDGE
and GLITCH
See Note 1
typical value
Whichever is greater
Whichever is smaller
See Note 1
1 - 19