Mitsubishi SA51 User Manual page 16

Menu operation (continued)
1 IMAGE
CONTRAST ........ Adjusts the picture contrast. The contrast becomes higher
as the number increases.
BRIGHTNESS .... Adjusts image brightness. The image becomes brighter as
the number increases.
COLOR MATRIX. ...... Adjusts color balance in each color of the image. See page
18.
COLOR TEMP... . Adjusts color temperature. See page 18.
SHARPNESS ...... Adjusts the picture sharpness. The sharpness becomes
sharper as the number increases.
TINT .................... Adjusts the color balance of the image. The color balance
of the image shifts green as the number increases and
shifts to purple as the number decreases (displays only when the source is selected to
VIDEO).
• When the TV50 (PAL, SECAM) signal is inputted, you cannot adjust the TINT.
COLOR ................ Adjusts the color intensity of the image (displays only when the source is selected to VIDEO).
2 INSTALLATION
AUTO POWER ON ..... To select whether to boot up automatically when the power is
turned on external to the projector. In this case, the main
power switch of the projector has to be ON. Set this when the
projector is hanging on the ceiling.
• The projector is in stand-by mode when the lamp is not
AUTO POWER OFF .. Use to select the length of time before projector switches to stand-by when there is no input
signal selected source. Select 0 min. to cancel this function.
IMAGE REVERSE Use to reverse or invert the projected image. MIRROR is used for rear projection. MIRROR
INVERT is effective when the projector is ceiling-mounted.
3 FEATURES
MENU POSITION . Use to select the position where the menu is displayed,
(upper left) or
EXPAND MODE Selects the mode of enlarging screen. See page 21.
AUDIO MODE ....... Select 1 (COMPUTER mode) to output the sound which is
inputted to audio input terminal only when the source is
selected to COMPUTER. Select 2 (VIDEO mode) to output
the sound which is inputted to audio input terminal only
when the source is selected to VIDEO. Select 3
(PARMANENT mode) to output the sound which is
inputted to audio input terminal all time.
SPLASH SCREEN . Use to display the splash screen on the screen when the
power is turned ON.
VIDEO SIGNAL . When AUTO is set, the appropriate video format is automatically selected according to the
input signal. If the image does not appear correctly, select the desired video format
manually. Adjust the projector to the appropriate format when the projector either is not
projecting normally in auto mode or is projecting PAL-M/PAL-N signals.
ANAMORPHIC... Set to ON when displaying DVD discs which are recorded as letter boxed images (in right
and left direction).
LANGUAGE ....... Use to select the language for the projector display such as menu. (
/ Deutsch / Français / Italiano /
RESET ALL ........ Use to reset the MENU setting.
EN – 16
on. In this case, use the remote control to turn on the
lamp.
(lower right).
)
Opt
XGA60
IMAGE
CONTRAST
BRIGHTNESS
COLOR MATRIX USER
COLOR TEMP. STANDARD
SHARPNESS
TINT
COLOR
Opt
XGA60
INSTALLATION
AUTO POWER
OFF
ON
AUTO POWER
OFF
OFF
IMAGE REVERSE OFF
Opt
XGA60
FEATURE
MENU POSITION 1.
A
EXPAND MODE 1.
A
AUDIO MODE
?
VIDEO SIGNAL AUTO
ANAMORPHIC OFF
A
LANGUAGE English
Ë
ALL RESET OK
/ English / Español
0
0
0
0
0
2