Advertisement
3.0 Installation
Please make sure that the wall or ceiling is strong enough to withstand 3 times the weight
of the camera. Please install the camera in and under a dry environment.
1.
2. Route and connect the cables.
3. Secure the mounting base with camera to the wall with the screws provided.
4. Bracket adjustment. Before adjustment, preview the image of the camera on a monitor
5. Open the cover of the camera as shown in the following figure and then insert a micro
9
Attach the drill template to the place where you want to fix the camera. Then drill the
screw holes and the cable hole on the wall according to the drill template.
64.6mm
64.6mm
and then loosen the fixed ring to adjust the view angle of the camera.
Fixed Screws
360° Rotation
SD card.
5
Mounting Base
360° Pan
90° Tilt
Advertisement
