Advertisement
4.0 Network Connection
Connecting the Network Cable
1.
2. Find the IP-Tool from the CD and then install it in the computer. After that, run the IP
3. Modify the IP address. The default IP address of this camera is 192.168.226.201. Click the
4. Double-click the camera listed in the IP-Tool or manually enter the IP address in
11
Make sure that the camera and the PC are well connected via LAN.
Tool as shown below.
information of the camera listed in the above table to show the network information
on the right hand. Modify the IP address and gateway of the camera and make sure its
network address is in the same local network segment as that of the computer. Please
modify the IP address of your device according to the practical situation.
For example, the IP address of your computer is 192.168.1.4. So the IP address of the
camera shall be changed to 192.168.1.X and the gateway shall be changed to 192.168.1.1.
After modification, please enter the password of the administrator and click "Modify"
button to modify the settings. The default password of the administrator is "123456".
the address bar of the web browser to connect IP-CAM. Then follow directions to
download and install the plugin. Enter the username and password in the login
interface. The default username is admin; the default password is 123456.
Advertisement
