Advertisement
3.0 Installation
Please make sure that the wall or ceiling is strong enough to withstand 3 times the weight
of the camera. Please install the camera in and under a dry environment.
1.
Fixed Screw
2. Drill the screw holes and the cable hole on the wall according to the drill template.
3. Route and connect the cables. Then secure the mounting base to the ceiling or wall
4. Open the cover of the dome and then insert a micro SD card.
5. After that, adjust Zoom or Focus to obtain an optimum image. Before adjustment, view
8
Loosen the fixed screw to disassemble the camera.
with the screws provided.
the image of the camera on a monitor. (If the model you get is motorised zoom lens,
please skip this step).
Insert a Micro SD Card
Mounting Base
Enclosure
Dome
Cover
Focus
Zoom
Advertisement
