Remote Control - Memorex MT2365 Owner's Manual

REMOTE CONTROL

*
You can use these buttons to operate
your VCR or Cable/Satellite box
after you have programmed the remote
control for the code that operates your
product.
1. TV, VCR, CAB/SAT POWER Button* - Used to turn the
TV, VCR or Cable/Satellite box on or off.
2. VCR Operation Buttons* - Press to operate your VCR.
3. VOL (VOLUME) /
increase, or the button to decrease the volume level.
4. MUTING Button - To turn off the sound, press this
button once. The TV will be silenced and the symbol
"MUTING" will appear on the screen. The muting feature
can be released by pressing the MUTING button again
or one of the VOL or
5. CALL Button - When you press this button, the channel
number tuned will appear on the upper right corner of
the screen. Press the button again to remove display
from the screen.
6. QUICK VIEW Button - This button allows you to go
back to the previous channel selected by just pressing
the QUICK VIEW button. Press this button again to return
to the channel you were watching.
7. TV/AV Button - Switches between TV and external
inputs.
8. Direct Channel Selection Buttons (0-9)* - Allows
direct access to any channel of the TV, VCR or Cable/
Satellite box.
9. MENU Button - Press to display the On-Screen menu
function.
10. RESET Button - Press to reset the On-Screen picture
and sound adjustments to their factory preset positions.
Press to reset a password in the V-CHIP Password
setting mode.
11. TV, VCR, CAB/SAT selector Buttons - Press to select
the TV,VCR or Cable/Satellite box to be operated.
3I60201A E/COV-09
1
2
3
4
5
6
7
8
9
10
11
Buttons - Press the button to
button.
5
POWER
TV VCR CAB/SAT
REC PAUSE/STILL STOP TV/VCR
REW PLAY F.FWD
CH
VOL VOL
CH
MUTING AUDIO SELECT
CALL SLEEP
TV/CAP/
TV/AV QUICK VIEW TEXT CH.1/2
1 2 3 CH ENTER
4 5 6
7 8 9 0
MENU SET ENTER
RESET
TV VCR CAB/SAT CODE SET
12. CH (CHANNEL)
channels of the TV, VCR or Cable/Satellite box.
13. AUDIO SELECT Button - Switches sound between
mono and stereo, and SAP when receiving broadcasts
in stereo or SAP.
14. SLEEP Button - To set the TV to turn off after a preset
amount of time, press the SLEEP button on the remote
control. The clock will count down 10 minutes each time
the button is pressed in the order of 120, 110, 100, ······
20, 10, 0. After the sleep time is programmed, the
display will disappear then reappear momentarily every
ten minutes to remind you the sleep timer function is
operating. To confirm the sleep time setting, press the
SLEEP button once and the remaining time will be
momentarily displayed. To cancel sleep time, press the
SLEEP button repeatedly until the display turns to 0.
15. TV/CAPTION/TEXT Button - Press this button to switch
between normal TV and the two Closed Caption modes
(captions and 1/2 of full screen text). Closed Captioning
will display text on screen for hearing impaired viewers.
16. CH.1/2 Button - Switches between Channel 1 and
Channel 2 in the Closed Caption mode.
17. CH ENTER Button* - Press to input the selected
channel of the VCR or Cable/Satellite box.
18. ENTER Button - Press to enter or select information for
On-Screen operations.
19. SET + / – Buttons - Press to select the desired setting
during On-Screen operations.
20. CODE SET Button - Used to register the 2-digit codes
to operate your VCR or Cable/Satellite box. Press this
button and the VCR button or the CAB/SAT button
simultaneously to start a registration.
03*02*2000, 22:40
12
13
14
15
16
17
18
19
20
/ Buttons - Used to change the
5