24” TRUE FLAT STEREO COLOR TV MODEL: MT2245 BEFORE OPERATING THIS PRODUCT, PLEASE READ THESE INSTRUCTIONS COMPLETELY. IMPORTANT: CHANNELS MUST BE SET INTO MEMORY BEFORE USING OPERATING INSTRUCTIONS THE CHANNEL +/– BUTTONS.
CONTENTS Contents...1 Important Safety Instructions ...2 Power Source ...4 Location of Controls...4 • Front...4 • Side...5 • Rear Panel...5 Remote Control ...6 • Battery Installation ...7 • Effective Distance of the Remote Control Transmitter ...7 • Customizing Your Remote Control ...8 •...
IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. TO PREVENT ELECTRIC SHOCK, MATCH THE WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERTED.
Page 4
IMPORTANT SAFETY INSTRUCTIONS (CONTINUED) 13. LIGHTNING To protect your product from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.
Insert the AC plug (with the 2 blades) into a conveniently located AC outlet having 120V, 60 Hz. NOTE: The AC plug supplied with the unit is polarized to help minimize the possibility of electric shock. If the AC plug does not fit into a nonpolarized AC outlet, do not file or cut the wide blade.
LOCATION OF CONTROLS (CONTINUED) SIDE Carrying Handles 10. AV3 AUDIO/VIDEO IN Jacks - Audio and Video signal cables from an external source can be connected here. AV button must be set to VIDEO3. REAR PANEL 12. S-VIDEO IN Jack (Rear of Unit) - Connect an external unit that utilizes an S-video cable to this jack. 13.
The chart below will show you the remote button’s function when in the desired mode (TV, VCR, CABLE, DVD). For example, to Play a tape in a VCR, press the VCR Function button, then the Navigation ( ) button as this button is also the VCR Play button.
BATTERY INSTALLATION Open the battery compartment cover. Follow these precautions when using batteries in this device: 1. Use only the size and type of batteries specified. 2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device.
Your TV comes equipped with a universal remote control. In addition to controlling the TV, this universal remote can also operate a VCR, DVD player and a cable box (even if your units are made by manufacturers other than Memorex). If you accidentally change the program for your TV, simply use 0001 as the television code.
CABLE (CATV)/SATELLITE CONNECTIONS This TV has an extended tuning range and can tune most cable channels without using a Cable TV converter box. Some Cable TV companies offer “premium pay channels” in which the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the cable company.
OUTDOOR ANTENNA CONNECTIONS OUTDOOR VHF/UHF ANTENNA CONNECTION (ANTENNA NOT SUPPLIED) Follow the instructions for the type of antenna system you intend to use. If using Cable or Satellite, see page 12. Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin–lead wire) VHF/UHF 75 Ohm Connect the 75 ohm cable from...
Follow the instructions below to connect a VCR to your television using a 75 ohm coaxial cable. (CABLES NOT INCLUDED.) 1. Connect the cable, satellite or incoming antenna to the ANT jack on the rear of the VCR. 2. Connect a 75 ohm coaxial cable from the VCR’s 75 Ohm OUT jack to the ANT jack on the rear of the TV. 3.
Page 16
Follow the instructions below to connect an S-VIDEO VCR to your television using an S-video cable.(CABLES NOT INCLUDED.) 1. Connect the cable, satellite or incoming antenna to the ANT jack on the rear of the VCR. 2. Connect the left and right audio cable from the VCR’s Audio OUT jacks to the TV’s AV1 left and right Audio IN jacks. 3.
Follow the instructions below to connect a DVD player to your television using Audio/Video cables. (CABLES NOT INCLUDED.) From Audio From Video Out 1. Connect the left and right audio cable from the DVD’s Audio OUT jacks to the TV’s AV1 or AV2 left and right Audio IN jacks.
Follow the instructions below to connect a DVD player to your television using the Cr, Cb, Y jacks. (CABLES NOT INCLUDED.) 1. Connect the left and right audio cable from the DVD’s Audio OUT jacks to the TV’s AV2 left and right Audio IN jacks. 2.
This TV can show the On-Screen display in English, Spanish or French. Press the POWER button to turn on the TV. Press the MENU button ; the MENU screen will appear. PICTURE SOUND TIMER CUSTOM LANGUAGE ENGLISH FRANCAIS ESPANOL MENU BAR When the desired language is in red, press the Navigation (❿) button to select it.
Press the POWER button to turn on the TV. Press the MENU button ; the MENU screen will appear. TIMER AM12:00 MENU BAR When CLOCK SET is in red, press the Navigation (❿) button to select it. FAQs: I set the clock previously, but now it is not set, why? If there is a power outage, or if your unit was unplugged, you may have to reset the time.
Simply press the TV/CATV button to set the TV to TV or CATV (Cable TV) mode. To change the type of cable (STD, HRC, IRC), simply change the TV/CATV option under the TUNING menu. SETTING THE CHANNELS INTO MEMORY This TV is equipped with a channel memory feature which allows channels to skip up or down to the next channels set into memory, skipping over unwanted channels.
After setting channels into memory, you can add or delete channels as follows: COLOR BRIGHTNESS CONTRAST SHARPNESS TINT BLUE BACK Press the POWER button to turn on the TV. Press the MENU button ; the MENU screen will appear. TO ADD A CHANNEL PICTURE SOUND TIMER CUSTOM LANGUAGE CHANNEL TV/CABLE...
There are 2 more options in the TUNING menu described below: PICTURE SOUND TIMER CUSTOM LANGUAGE COLOR BRIGHTNESS CONTRAST SHARPNESS TINT BLUE BACK MENU BAR Press the POWER button to turn on the TV. Press the MENU button ; the MENU screen will appear. MANUAL: Press the Navigation (➛) or (❿) button while MANUAL is selected, the unit will then automatically go up one channel...
Press the POWER button to turn on the TV. Adjust the volume level by pressing the VOLUME + or – button. The volume level will be indicated on the screen by green bars. As the volume level increases/decreases, so do the number of bars. NOTES: •...
MUTE Press the MUTE button to turn off the sound. The TV’s sound will be silenced and “MUTE” will appear on the screen. The sound can be turned back on by pressing this button again or one of the VOLUME + or – buttons RECALL Press the RECALL button once, the channel being viewed and Stereo/Mono will appear.
WHAT IS CLOSED CAPTIONING? This television has the capability to decode and display Closed Captioned television programs. Closed Captioning will display text on the screen for hearing impaired viewers or it will translate and display text in another language. CLOSED CAPTIONING WITH A VCR Closed Captioned programs can be recorded and played back on a VCR with the Closed Captioned text intact.
ON-SCREEN CONTROL ADJUSTMENTS (PICTURE) PICTURE SOUND TIMER CUSTOM LANGUAGE COLOR BRIGHTNESS CONTRAST SHARPNESS TINT BLUE BACK MENU BAR Press the PICTURE button. PICTURE SOUND TIMER CUSTOM LANGUAGE COLOR BRIGHTNESS CONTRAST SHARPNESS TINT BLUE BACK MENU BAR Adjust the setting using the Navigation (➛) and (❿) buttons as desired.
ON-SCREEN CONTROL ADJUSTMENTS (SOUND) PICTURE SOUND TIMER CUSTOM LANGUAGE BASS TREBLE EFFECT BALANCE MENU BAR Press the SOUND button. PICTURE SOUND TIMER CUSTOM LANGUAGE BASS TREBLE EFFECT BALANCE MENU BAR Adjust the setting using the Navigation (➛) and (❿) buttons as desired. Press the EXIT button to exit the SOUND menu.
Parental Control enables parents to prevent their children from watching inappropriate material on TV. Parental Control reads the ratings for programming (except for news, sports, unedited movies on premium cable and Emergency System signals), then denies access to programming if the program’s rating meets the limitations you select. In this case, the program will be blocked.
SETTING PARENTAL CONTROL (CONTINUED) MPAA RATING SET-UP PARENTAL CONTROL CUSTOM ENTER SECRET CODE MENU MENU BAR Enter the PARENTAL BLOCK menu screen as described on page 28. MPAA RATING SYSTEM CUSTOM PG-13 NC-17 MENU BAR While MPAA RATING is selected, press the Navigation (❿) button.
SETTING PARENTAL CONTROL (CONTINUED) TV RATING SET-UP PARENTAL CONTROL CUSTOM ENTER SECRET CODE MENU MENU BAR Enter the PARENTAL BLOCK menu screen as described on page 28. U.S. TV PARENTAL GUIDELINES RATING SYSTEM CUSTOM NONE TV-Y TV-Y7 TV-G TV-PG TV-14 TV-MA CONTENT MENU BAR...
SETTING PARENTAL CONTROL (CONTINUED) CANADIAN ENGLISH /FRENCH RATING SET-UP This setting is used to receive data service for the Canadian English/French Language Rating System in accordance with the EAI-744-A Standard. PARENTAL CONTROL CUSTOM ENTER SECRET CODE MENU MENU BAR Enter the PARENTAL BLOCK menu screen as described on page 28.
SETTING PARENTAL CONTROL (CONTINUED) CHANGING THE PASSWORD PARENTAL CONTROL CUSTOM ENTER SECRET CODE MENU MENU BAR Enter the PARENTAL BLOCK menu screen as described on page 28. MPAA RATING SYSTEM CUSTOM NEW SECRET CODE - CONFIRM MENU BAR While CHANGE SECRET CODE is selected, press the Navigation (❿) button.
PICTURE SOUND TIMER CUSTOM LANGUAGE COLOR BRIGHTNESS CONTRAST SHARPNESS TINT BLUE BACK MENU BAR Press the POWER button to turn on the TV. Press the MENU button ; the MENU screen will appear. TIMER PM 4:10 CHANNEL TV/CATV ONCE DAILY MENU BAR When ON TIMER is in red, press the Navigation (❿) button to select it.
PICTURE SOUND TIMER CUSTOM LANGUAGE COLOR BRIGHTNESS CONTRAST SHARPNESS TINT BLUE BACK MENU BAR Press the POWER button to turn on the TV. Press the MENU button ; the MENU screen will appear. TIMER PM 4:10 ONCE DAILY MENU BAR When OFF TIMER is in red, press the Navigation (❿) button to select it.
Check the following before requesting service: SYMPTOM POSSIBLE CAUSE POWER No power. The AC power cord is not connected. TV BROADCAST RECEPTION TV station experiencing problems. Poor or no picture. Picture control is not adjusted. Possible local interference. Antenna/CATV connector is not connected. TV station experiencing problems.
RECEPTION DISTURBANCES Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna. Outdoor antennas are recommended for best results if not using cable or a satellite. The most common types of television interference are shown below.
WWW.MEMCORPINC.COM OR CONTACT CUSTOMER SERVICE AT 1-800-919-3647. PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED TO RETURN THIS PRODUCT TO YOUR PLACE OF PURCHASE OR MEMOREX. FOR PARTS AND ACCESSORIES, CONTACT FOX INT’L AT 1-800-321-6993.
Page 39
Memcorp, Inc. Weston, FL 33331 Printed in Hong Kong Visit our website at www.memcorpinc.com...