cameras.
Note:
If more than 20 minutes have passed since the camera was turned on, the camera cannot be set up
from the Setup Program. In this situation, restart the camera.
2. Click [Automatic Setup (Internet Access)].
- For the first time installation or after pressing the Factory Default Reset
button, only [Automatic Setup (Local Access Only)] can be selected. To
set up the camera with Static or DHCP settings, after performing the
[Automatic Setup (Local Access Only)], run the Setup Program again
and select [Manual Setup].
3. The Enter Network Password window is displayed. Enter the username and password that were set,
and click [OK].
33