Advertisement
- When searching for multiple cameras, the cameras can be identified
with the MAC Addresses labeled near the Ethernet (LAN) port of the
cameras.
Note:
- If more than 20 minutes have passed since the camera was turned on,
the camera cannot be set up from the Setup Program. In this situation,
restart the camera.
- The Setup Program may not list any cameras due to your firewall or
antivirus soft-ware settings on your PC. If you cannot disable your
firewall or antivirus software, you can set up the camera entering the
camera MAC address.
4. Click [Automatic setup (Local Access Only)].
27
Advertisement
