Table of Contents
Advertisement
Literature Change History
CG-SVN01A-EN March 2003
Original Kit Installation manual for mounting and wiring the
TCI and/or IPCB module.
Overview of Manual
Note: One copy of this document ships inside each
remote human interface kit and is customer
property. It must be retained by the unit's
maintenance personnel.
This booklet describes proper installation procedures for the
Trane Communication Interface and/or the Interprocessor
Communications Bridge Module (TCI / IPCB). By carefully
Literature Change History ................................................ 2
Overview of Manual ......................................................... 2
Installation
Kit Inspection .................................................................... 3
Module Mounting Locations ............................................. 3
TCI Module Installation .................................................... 5
TCI Wiring Harness Installation ....................................... 5
IPCB Module Installation ................................................. 7
IPCB Wiring Harness Installation .................................... 8
About the Manual
reviewing the information within this manual and following
the instructions, the risk of improper operation and/or com-
ponent damage will be minimized.
Step-by-step instructions for programming and/or viewing
the; SETUP information, DEFAULT setpoints, DIAGNOSTIC
system failures, and checking OPERATING status are given
in the latest edition of the appropriate Programming,
Troubleshooting Guide that shipped with the unit.
Should equipment failure occur, contact a qualified service
organization with qualified, experienced HVAC technicians
to properly diagnose and repair this equipment.
Note: The procedures discussed in this manual
should only be performed by qualified, experienced
HVAC technicians.
Table of Contents
2
Advertisement
Table of Contents
