Advanced Connections; Preparations; Connecting Cables; Digital Connections - Marantz CD5004 User Manual

Advanced connections

Preparations

Connecting cables

Select the cables according to the equipment being connected.
Audio cables
Optical digital connections
Optical cable (sold separately)
Coaxial digital connections
Coaxial digital cable (sold separately)

Remote control connection

Remote connector cord (supplied)

Digital connections

When connecting the optical digital output connector
with an optical transmission cable (sold separately)
Match the shapes then insert fi rmly.
Remote control connection
CD recorder /
When you use this unit connected to a Marantz amplifi er, this unit
MD recorder
receives operation signals sent from the amplifi er and operates
AUDIO
accordingly.
OPTICAL COAXIAL
n Connection
IN IN
Use the supplied remote connection cable to connect the REMOTE
CONTROL IN terminal of this unit to REMOTE CONTROL OUT
terminal of the amplifi er.
n Setting
Set the remote control switch on the rear panel of this unit to
"EXTERNAL" to use this feature.
• This setting will disable remote sensor reception of this unit.
• To operate the unit, point the remote control at the remote
sensor of the amplifi er.
To use this unit without connecting it to the amplifi er, set the remote
control switch to "INTERNAL".
The unit
Amplifi er
ENGLISH
Set to "EXTERNAL."
Remote connector cord (supplied)
Signal fl ow
12 12