Playing Back At Different Speeds (Pitch Control Function); Setting Higher Quality Sound (Audio Ex Function); Performing Menu Settings - Marantz CD5004 User Manual

Playing back at different speeds
(Pitch control function)
You can use the Pitch control function to play back music CDs (CD-DA)
at a different speed (pitch) during playback.
Increasing the play speed
[PITCH+]
Press .
• "PITCH" will light up and each time the button is pressed, the
playback speed will increase (max +12).
Reducing the play speed
[PITCH–]
Press .
• "PITCH" will light up and each time the button is pressed, the
playback speed will decrease (min –12).
Returning play to the normal speed
[PITCH RESET]
Press .
• The "PITCH" indicator on the display goes off and "Pitch: 0" appears
on the main display.
[PITCH RESET]
• Press again to restore the original playback speed
setting.
NOTE
• The pitch control function is enabled only when Audio EX mode is
set to "Audio EX OFF" (vpage 14).
• Pitch control playback is not possible with MP3 and WMA fi les.
Setting higher quality sound (Audio
EX function)
You can use the Audio EX function to set higher quality sound.
During stop mode, press
[SOUND MODE]
[SOUND MODE]
• When is pressed each time, the display switches
sound modes in the following order.
Audio EX OFF Audio EX 1
The default setting
Audio EX 2
Pitch Digital
Sound mode
control output
Available *1
Audio EX OFF:
Enable
Audio EX 1:
Plays with a higher
Disable Available *2
quality sound than
"Audio EX OFF" mode.
Audio EX 2:
Plays analog audio
Disable Not available
output using highest
quality sound.
(*1) Digital signals are output only when the pitch control setting is
"Pitch: 0".
(*2) The "Digital Out" setting of the menu overrides the Audio EX
setting (vpage 16).
[DISPLAY]
(*3) When you press , the display turns on for about 3
seconds.

Performing menu settings

You can set the following functions. For further information, see the
page indicated in parentheses ( ).
.
n Peak (Peak level search) (vpage 15)
n Edit (Edit mode) (vpage 15)
n MP3/WMA Mode (File playback mode setting) (vpage 16)
n Digital Out (Digital audio output setting) (vpage 16)
n Quick Replay (Quick replay playback) (vpage 16)
n Auto Standby (Auto standby mode) (vpage 16)
1 During stop mode, press
Display
2 Press 2 or 3 to select the menu item you want to set.
On
*2 3 [ENTER]
Press
On
Peak (vpage 15)
2
Off
(during
Edit (vpage 15)
playback)
*3
2
MP3/WMA Mode (vpage 16)
2
Digital Out (vpage 16)
2
Quick Replay (vpage 16)
2
Auto Standby (vpage 16)
ENGLISH
.
[MENU]
.
3
3
3
3 2
3
3
14 14