Advanced Connections; Connecting To A Digital Audio Component - Marantz SA-15S2B Limited User Manual

ENGLISH

ADVANCED CONNECTIONS

CONNECTING TO A DIGITAL AUDIO COMPONENT

The player has one digital optical output connector and one digital coaxial output connector.
You can enjoy digital recording when the player is connected to a CD recorder or other digital recording component.
• After connecting, press the DIGITAL OUT button on the remote control while the CD is stopped and set the digital output for the
audio CD signal from the DIGITAL AUDIO OUT terminal to ON.
Switch the digital output ON and OFF using the button on the remote control. When digital output is switched OFF, "D OFF" lights
up on the LDC display.
To enjoy better sound quality, switch digital output to OFF when digital output is not in use.
Caution:
Signals are sent from the Digital Audio Output (Optical and Coaxial) terminals only when playing back audio CDs or the CD layer
of Super Audio CDs. There are no signals when other media are being played back.
7
Connecting the optical output
connector
Use an optical digital connecting cable available on the market.
Insert the plug firmly in until it clicks into place. Do not bend or
bundle the optical digital connecting cable.
IN OUT
Optical digital connecting
cable (available on market)
ANALOG IN/OUT ANALOG IN/OUT
L
R
MD MD MD COMMON MD COMMON CD CD
INPUT INPUT OUTPUT OUTPUT
CD recorder, MD deck, AV amplifier, etc.
14
:
Signal flow
DIGITAL IN/OUT DIGITAL IN/OUT
OPTICAL OPTICAL
MD MD MD/CD MD/CD
INPUT OUTPUT INPUT OUTPUT
7
Connecting the coaxial output
connector
Use a coaxial digital connecting cable available on the
market.
IN OUT
Coaxial digital
connecting cable
(available on market)
ANALOG IN/OUT ANALOG IN/OUT
L L
R R
OUTPUT OUTPUT
INPUT INPUT
CD recorder, MD deck, AV amplifier, etc.
:
Signal flow
DIGITAL IN/OUT DIGITAL IN/OUT
COAXIAL COAXIAL OPTICAL OPTICAL
INPUT INPUT OUTPUT OUTPUT INPUT INPUT OUTPUT OUTPUT
EX EXTERNAL