Remote Control Unit Rc7200Sr; Main Features & Functions; Names Of Parts & Functions - Marantz SR7200 User Manual

REMOTE CONTROL UNIT RC7200SR

MAIN FEATURES & FUNCTIONS
• PROGRAMMABLE LEARNING FUNCTION
Can easily be programmed to learn the codes for almost any other
infrared-based remote, allowing the remote control functions for many
different components to be consolidated conveniently in a single unit.
• PRESET CODES
Function buttons already contain preset codes (using the RC-5/RC-6
remote control language) for other remote-controllable Marantz audio-
visual component.
• LUMINOUS BUTTONS
The remote controller uses luminous buttons which store light allowing
it to be used even in the darkened.
• LARGE, EASY-TO-READ DISPLAY
Large LCD (liquid crystal display) messages and other information at a
glance.
• JOG DIAL
The function selected by Jog Dial (displayed on the LCD) can be
operated directly by the enter button.
.
• MACRO CAPABILITY
Macro function allows the remote controller to be programmed to
execute complex strings of multiple commands using a single
keystroke.
• NAME ASSIGNMENT
Allows one to change the (displayed via the LCD) name for a function
button.
NAMES OF PARTS & FUNCTIONS
v
ENT
n
CH
⁄2
DSS
L D
⁄6
CLEAR
⁄5
AUTO
DSP
Names of Buttons & Functions
z MODE button
Used to change the operation mode of the remote controller. Pressing
this button cycles the remote controller through USE → LEARN →
NAME → USE, with the currently selected mode displayed on the
LCD.
x MACRO button
Used to switch the remote controller in and out of the MACRO mode,
which is used to program complex operational sequences (macros),
with the currently selected mode displayed on the LCD.
c Power ON and OFF buttons
Used to turn the main system component (usually a preamplifier or
receiver) ON and OFF.
v Source ON/OFF button
Used to turn specific sources (such as DVD players, etc.) ON and OFF
independently from the rest of the system.
b LCD
Used to display information about currently selected modes and
functions.
n Jog Dial
Used to select the operation content for each source. 10 types of
direct operation are possible for each of the 11 functions including
DVD, TV, AMP, etc. After selecting the desired function, press either
of the ENT button m to transmit the signal.
17
c
POWER
SOURCE
ON OFF
ON / OFF
z
LEARNING REMOTE
CONTROL RC 7200SR MACRO MODE
x
b
m
ENT
⁄0
VOL
OK
.
DVD
C D CD-R/MD
T V VCR AUX
,
TUNER TAPE AMP
⁄4
⁄3
MEMO GUIDE MUTE
⁄1
DTS CS5.1 6.1
1 2 3 4 5
6-STEREO 2CH OSD SLEEP
6 8 9
7 0 ⁄7