Basic Settings; Selecting Priority Mode - Panasonic AW-UE20KP Operating Instruction

Basic Settings

From the Setup menu click [Basic] button to display the Basic settings page.
In basic settings, user can select [Priority mode], set up name of [Live page], and access [Date & Time].

Selecting Priority Mode

Configure the setting for the priority output of video.
Click [Setup] > [Basic] > [Priority Mode]
Click [Set] to save the configuration.
 HDMI (4K): 4K video is output to an external monitor
connected via an HDMI cable.
 USB (4K): You can use this unit as a 4K Web
camera. The camera can also be controlled from a
personal computer. When the unit is used as a
4K-compatible Web camera, the frame rate will be
fixed at 5 fps.
 IP (4K): Enables IP image transmission. IP image
transmission of 4K images uses the H.264/H.265
video coding format. This unit cannot display
H.264/H.265 format images on the Live screen. To
display H.264/H.265 images, use an external device
or external software that supports H.264/H.265
images.
 HDMI/USB: HD format video is output to an external
monitor connected via an HDMI/SDI cable. Enables
the unit to be used as a Web camera. The camera
can also be controlled from a personal computer.
[Note]
 When "Priority Mode" is changed, OSD display and IP streaming may not work, as the unit may reconnect to the
RTMP server.
 When "Priority Mode" is set to IP (4K), USB (4K) or HDMI (4K), Frame rate of Video is automatically set to
30p/29.97p/25p.
Under the USB (Video Conference) mode, in order to minimize the delay of UVC output, HDMI/SDI video output

and video output via IP transmission will be
 IP: HD format video is output to an external monitor
connected via an HDMI/SDI cable. Enables IP image
transmission. The IP transmission of H.264/H.265
images is also supported. This unit cannot display
H.264/H.265 format images on the Live screen. To
display H.264/H.265 images, use an external device
or external software that supports H.264/H.265
images.
 USB (Video Conference): Enables the unit to be
used as a Web camera. Specially tuned for online
meetings, the unit automatically goes into the
Standby mode when an online meeting comes to an
end; if an online meeting starts while the unit is in the
Standby on mode, the unit automatically switches
into the Power On mode.
In this mode, you cannot output video via HDMI or
SDI, and you cannot output video via IP
transmission. (Video output will not be possible
except via USB). Also, in this mode, the audio output
is forcibly turned off.
disabled.
76