Crestron 4 Series Getting Started

AV4
4-Series™ Control System
Getting Started
Scan the QR code to view the Quick Start Guide.
www.crestron.com/docs/8506
For additional information on the Crestron AV4, visit
www.crestron.com/model/6512049.
Pair with Apple® HomeKit® Technology
The AV4 can be paired with Apple® HomeKit® technology to enable
communication between the control system and Apple HomeKit
devices and accessories.
To pair the AV4 with an Apple HomeKit system, open the Apple Home
app on an iOS® device, and then use the device camera to scan the
QR code provided below.
NOTE: To ensure the control system is paired with the homeowner's
Apple HomeKit system, the QR code must be scanned by an iOS
device associated with the homeowner's Apple ID.
For more information on pairing the device with an Apple HomeKit
l
system, refer to https://support.apple.com/en-us/HT204893.
For more information on integrating the control system with
l
Apple HomeKit devices, refer to
www.crestron.com/Partners/Integrated-Partners/Apple.
NOTE: The above QR code is unique to the device that shipped with
this document.
Certification and Compliance
Regulatory Model: M201921001
Federal Communications Commission (FCC) Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is
subject to the following conditions:
(1) This device may not cause harmful interference and (2) this device
must accept any interference received, including interference that
may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the user's
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
l
Increase the separation between the equipment and receiver.
l
Connect the equipment into an outlet on a circuit different from
l
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
l
Industry Canada (IC) Compliance Statement
CAN ICES-3 (B)/NMB-3(B)
As of the date of manufacture, the product has been tested and
found to comply with specifications for CE marking.
This product is Listed to applicable UL® Standards and requirements
tested by Bureau Veritas.
Ce produit est homologué selon les normes et les exigences UL
applicables par Bureau Veritas.
Rack Mounting Safety Precautions
Elevated Operating Ambient Temperature: If installed in a closed or
multi-unit rack assembly, the operating ambient temperature of the
rack environment may be greater than room ambient temperature.
Therefore, consideration should be given to installing the equipment
in an environment compatible with the maximum ambient
temperature (Tma) specified by the manufacturer.
Reduced Airflow: Installation of the equipment in a rack should be
such that the amount of airflow required for safe operation of the
equipment is not compromised.
Mechanical Loading: Mounting of the equipment in the rack should be
such that a hazardous condition is not achieved due to uneven
mechanical loading.
Circuit Overloading: Consideration should be given to the connection
of the equipment to the supply circuit and the effect that
overloading of the circuits might have on overcurrent protection and
supply wiring. Appropriate consideration of equipment nameplate
ratings should be used when addressing this concern.
Reliable Earthing: Reliable earthing of rack-mounted equipment
should be maintained. Particular attention should be given to supply
connections other than direct connections to the branch circuit (e.g.,
use of power strips).
Electrical Connection:
"This product must be connected to an earthed mains socket-outlet."
Finland: "Laite on liitettävä suojamaadoituskoskettimilla
varustettuun pistorasiaan."
Norway: "Apparatet må tilkoples jordet stikkontakt."
Sweden: "Apparaten skall anslutas till jordat uttag."
The Waste Electrical & Electronic Equipment (WEEE) directive
marking on a product indicates that it should not be disposed of with
general waste. Instead, you are encouraged to reuse or recycle the
product in accordance with Directive 2012/19/EU of the European
Union. Proper disposal of this product will help prevent potential
negative effects on the environment and human health, which could
otherwise be caused by inappropriate waste handling. Penalties may
be applicable for incorrect disposal of this waste, in accordance with
your national legislation. For information about recycling this
product, please contact your household waste disposal service, your
original distributor, or Crestron.
Product Information - 8533B
2054542
12.21