ResMed AirFit P10 User Manual page 13

WARNING
Always follow cleaning instructions and use mild soap. Some
cleaning products may damage the mask, its parts and their
function, or leave harmful residual vapours that could be inhaled
if not rinsed thoroughly.
CAUTION

If any visible damage of a system component is apparent
(cracking, crazing, tears or cushion damage), the component
should be discarded and replaced.

Avoid connecting flexible PVC products (eg, PVC tubing)
directly to any part of the mask. Flexible PVC contains
elements that can be detrimental to the materials of the
mask, and may cause the components to crack or break.
Daily/After each use:

Disassemble the pillows from the frame according to the
disassembly instructions.

Thoroughly clean the separated mask components (excluding
headgear), by gently rubbing in warm (approximately 86°F/30°C)
water using mild soap.

To optimize the mask seal, facial oils should be removed from
the pillows after use.

Use a soft bristle brush to clean the vent.

Inspect each component and, if required, repeat washing until
visually clean.

Rinse all components well with drinking quality water and allow
to air dry out of direct sunlight.

When all components are dry, reassemble according to the
reassembly instructions.
Weekly:

Handwash the headgear in warm (approximately 86°F/30°C)
water using mild soap. It may be washed without being
disassembled. Rinse well and allow it to air dry out of direct
sunlight.
English
5