Monitoring Fault Condition - LG SV-iC5 Series Instruction Manual

11. Monitoring
11.3

Monitoring fault condition

Monitoring fault display
Group LED Display
Drive group
nOn
The kind of fault occurred during operation is displayed in nOn.
Up to 3 kinds of faults can be monitored.
This parameter gives information on fault types and the operating status at the time of the fault.
Refer to 1.6 How to monitor operation.
Refer to Page 13-1 for various fault types.
Fault History Monitoring
Group LED Display
I/O group
H 1 ~ H 5 : Up to 5 fault information is stored.
H 6 : Previous fault information stored in the code H1 thru H5 is all cleared.
. When a fault occurs during operation, it can be monitored in the nOn.
When the fault condition is reset via the STOP/RST key on the keypad or multi-function terminal,
information displayed in the nOn will be moved to the H1. In addition, the previous fault info stored in
H1 will be automatically moved to H2. Therefore, the updated fault info will be stored in the H1.
When more than 1 fault occurred at the same time, up to 3 types of faults will be stored in one code.
Parameter Name
[Fault Display]
Fault types Frequency
Current
Accel/Decel
Information
Parameter Name
H 1 [Fault history 1]
~
H 5 [Fault history 5]
[Reset fault history]
H 6
Set
value
-
Fault during constant run
Set
value
-
~
-
11-4
Min/Max Factory
range default
Fault during Accel
Fault during Decel
Min/Max Factory
range default
0/1
Unit
Unit
0
SV-iC5