Anchor Watch Alarm - Furuno 1933C Manual

OPERATIONAL SETUP
A n c h o r W a t c h A l a r m
A n c h o r W a t c h A l a r m
Press the [ALARM] key to open the alarm menu.
1
Use the trackball to select ANCHOR WATCH ALARM.
2
Press the EDIT soft key to open the anchor alarm window: ANCHOR WATCH
3
ALARM.
Use the trackball to select ON. This will not show on the screen.
4
Use the trackball and the alphanumeric keys to enter alarm setting: Operate the
5
trackball to select digit; use the alphanumeric keys to enter value. The available
anchor watch setting is 0.001 to 9.999 miles.
Press the ENTER soft key or push the [ENTER] knob to register setting. This
6
step is invisible.
Press the [ALARM] key to finish.
7
Note: If the arrival alarm range is changed, turn off the anchor watch alarm and
then turn it on again to give priority to the anchor watch alarm.
13
3