Table of Contents
Advertisement
Orbi Pro WiFi 6 Mini Router Model SXR30 and Orbi Pro WiFi 6 Mini Satellite Model SXS30
Connect your Orbi Pro WiFi 6 Mini router
The back of the router has one yellow WAN port and three LAN ports. The label on the
router displays model SXR30, and the preset WiFi network name (SSID) and password.
To cable your Orbi Pro router:
1. Connect your Orbi Pro router to a modem or gateway that provides Internet.
• If you use a modem, unplug the modem, remove and then reinsert the backup
battery if it uses one, and plug the modem back in.
• If you use a WiFi gateway, we recommend that you turn off your gateway's WiFi.
2. Use the Ethernet cable that came with your router to connect your modem or gateway
to the yellow WAN port on the back of your router.
3. Connect the power adapter to your router and plug the power adapter into an outlet.
The Power LED on the back of the router lights green.
When the bar LED on the front of the router lights solid white, the router's preset
WiFi network is ready for setup.
The router's bar LED turns off after about three minutes.
Place your Orbi Pro WiFi 6 Mini satellite
Your satellite must be within range of your router's WiFi signal in order for it to sync with
the router. Use the satellite's bar LED to help you determine where to place your satellite.
Overview and Setup
19
User Manual
Advertisement
Table of Contents
