Connect Your Orbi Pro Router - NETGEAR Orbi Pro SRR60 User Manual

Figure 4. Orbi Pro satellite label

Connect Your Orbi Pro Router

If you want to connect your Orbi Pro router to an existing gateway, we recommend that
you turn off your existing gateway's WiFi.
To cable your router:
1. Unplug your modem's power, leaving the modem connected to the wall jack for
your Internet service.
If your modem uses a battery backup, remove the battery, and then put the battery
back in.
2. Plug in and turn on your modem.
3. Connect your modem to the Internet port of your router with the Ethernet cable that
came with your router.
4. Connect the power adapter to your router and plug the power adapter into an
outlet.
5. If the Power LED does not light, press the Power On/Off button on the rear panel
of the router.
Overview
Orbi Pro
16 User Manual