Remove A Link Aggregation Group - NETGEAR Orbi Pro WiFi 6 Mini User Manual

Orbi Pro WiFi 6 Mini Router Model SXR30 and Orbi Pro WiFi 6 Mini Satellite Model SXS30
The ports are bound in a LAG. The ports now share a single VLAN Profile menu and
Mode menu, that is, they share the same VLAN and port mode.
8. Click the Apply button.
Your settings are saved.

Remove a link aggregation group

You can remove a link aggregation group (LAG). First remove the LAG, and then remove
the cables.
To remove a LAG:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window displays.
If your browser does not display a login window but displays a security warning and
does not let you proceed, see What to do if you get a browser security warning on
page 32.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you set the first time that you
logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > VLAN / Bridge Settings.
The VLAN / Bridge Settings page displays.
For the router (Base) and each satellite, the ports display on the page:
• Blue: The ports are connected to devices that are turned on.
• Gray: The ports are either not connected or are connected to devices that are
not turned on.
5. In either the Base (router) or Satellite section, click an Ethernet port that is part of
the LAG.
The Unbind button displays.
6. Click the Unbind button.
The ports are unbound.
7. Click the Apply button.
Your settings are saved.
Manage the WAN and other
Network Settings
142 User Manual