Console Redirection - Lanner electronics FW-7650 Series User Manual

Console redirection allows you to maintain a system from a remote location by re-directing keyboard
input and text output through the serial port. This section will tell you how to use console redirection.
1. Please insert console cable between on FW-7650 and Remote Client System.
2. Setup BIOS in FW-7650.
BIOS Advanced Chipset Features
BIOS Advanced Chipset Features
Enabled
Disabled
Auto
3. Configure Console redirection on client system. This example is for Windows platform.
i . Click the Start button, point to
Terminal.
ii. Enter any name for the new connection and select any icon.
iii. Click OK.
iv. From the Connect to pull-down menu, select a COM port available on your client system and
click OK.
v. Select
Baud Rate
bit 1.
4. Power on FW-7650 and it will display the bios information on the client system.
Baud Rate : 115200 (Default)
Console Redirection : Enabled(Default)
Attempt to redirect console via COM port.
Attempt to redirect console when keyboard absent.
If keyboard is plug in the Controller board, the Console Redirection
will not display BIOS screen on remote client.
If keyboard is not plug in the Controller board, the Console
Redirection will display BIOS screen on remote client.
programs
,
115200 Flow control
A p p e n d i x C

Console Redirection

Communications, and click
Accessories
,
None Data bit 8
,
Parity check None
Hyper
,
Stop