Lanner electronics FW-7650 Series User Manual page 32

Item
Date
Time
IDE Channel 0
Master
IDE Channel 0 Slave
IDE Channel 1
Master
IDE Channel 2
Master
Halt On
Base Memory
Extended Memory
Total Memory
IDE Adapters
The IDE adapters control the hard disk drive. Use a separate sub menu to configure each
hard disk drive.
Use the legend keys to navigate through this menu and exit to the main menu. Use Table 1
to configure the hard disk.
Item
IDE HDD
Auto-detection
Options
Month DD YYYY
HH : MM : SS
Options are in its sub menu
Options are in its sub menu
Options are in its sub menu
Options are in its sub menu
All Errors
No Errors
All, but Keyboard
All, but Diskette
All, but Disk/Key
N/A
N/A
N/A
IDE Primary Master sub menu
Options
Press Enter to auto-detect the HDD on this channel. If
Press Enter detection is successful, it fills the remaining fields on this
menu.
Description
Set the system date. Note that the 'Day'
automatically changes when you set the
date
Set the system time
Press <Enter> to enter the sub menu of
detailed options
Press <Enter> to enter the sub menu of
detailed options
Press <Enter> to enter the sub menu of
detailed options
Press <Enter> to enter the sub menu of
detailed options
Select the situation in which you want the
BIOS to stop the POST process and notify
you
Displays the amount of conventional
memory detected during boot up
Displays the amount of extended memory
detected during boot up
Displays the total memory available in the
system
Description