Bios Features Setup - Lanner electronics FW-7650 Series User Manual

IDE Channel 0
Master
Capacity
Access Mode
Cylinder
Head
Precomp
Landing zone
Sector

3.4 BIOS Features Setup

This section allows you to configure your system for basic operation. You have the opportunity
to select the system's default speed, boot-up sequence, keyboard operation, shadowing and
security.
Selecting 'manual' lets you set the remaining fields on this
None
screen. Selects the type of fixed disk. "User Type" will let
Auto
you select the number of cylinders, heads, etc. Note:
Manual
PRECOMP=65535 means NONE !
Auto Display Disk drive capacity (Approximated). Note that this size is
your disk drive usually slightly greater than the size of a formatted disk
size given by a disk checking program.
CHS
LBA
Choose the access mode for this hard disk
Large
Auto
Min = 0
Set the number of cylinders for this hard disk.
Max = 65535
Min = 0
Set the number of read/write heads
Max = 255
Min = 0
**** Warning: Setting a value of 65535 means no hard disk
Max = 65535
Min = 0
****
Max = 65535
Min = 0
Number of sectors per track
Max = 255