Init Display First - Lanner electronics FW-7650 Series User Manual

USB Keyboard Support : Select Enabled if your system contains a Universal
Serial Bus (USB) controller and you have a USB keyboard.
This item allows you to decide to active whether PCI Slot of

Init Display First :

VGA card or AGP first. The settings are "PCI Slot" and "AGP Slot".
Onboard FDD Controller : Select Enabled if your system has a floppy disk
controller (FDC) installed on the system board and you want to use it. If you install
add-in FDC or the system has no floppy drive, select Disabled in this field. The settings
are "Enabled" and "Disabled".
Onboard Serial Port 1 : Select an address and corresponding interrupt for the
first and second serial ports. The settings are "3F8/IRQ4", "2E8/IRQ3", "3E8/IRQ4",
"2F8/IRQ3", "Disabled", "Auto"