With a setting of 0, keyboard tracking will not affect the vol-
ume.
Keyboard Track operates according to the pitch that is
controlled by pitch bend, transpose, and Mod Sequence.
It is not affected by pitch changes produced by vibrato
or Virtual Patch.
EG (Envelope Generator)
Page10: EG 1
Page11: EG 2
These parameters are the same as for a synth program.
Refer to "3. SYNTH Parameters."
LFO (Low Frequency Oscillator)
Page12: LFO 1
Page13: LFO 2
These parameters are the same as for a synth program.
Refer to "3. SYNTH Parameters."
CH PARAM
These set the output level and panning (panpot) for each of
the sixteen filters of the carrier (synth).
To make settings, use the CH PARAM [SELECT] key and the
sixteen knobs, or the CURSOR[√][®] keys and the [+/YES]
[–/NO] keys.
Page14: CH LEVEL
A: Ch Level
Specify the output level for each filter of the carrier.
14A CH LEVEL
CH[01]:
Channel
Channel..........................................................[01...16]
Select the filter for which you wish to make settings.
Level ..........................................................[000...127]
Specify the output level of the filter.
A: Ch Pan
Specify the panpot for each filter of the carrier.
Channel ......................................................... [01...16]
Select the filter for which you wish to make settings.
Pan ....................................................[L63...CNT...R63]
Specify the panning of each filter.
These parameters are the same as for a synth program.
Refer to "3. SYNTH Parameters."
These parameters are the same as for a synth program.
Refer to "3. SYNTH Parameters."
060
A: InitProgram
Level
This function initializes the settings of the currently selected
vocoder program (program common, timbre, effect, arpeg-
giator).
When a vocoder program is initialized, its voice mode will
remain at Vocoder.
For the procedure refer to "3. SYNTH Parameters."
Page15: CH PAN
15A CH PAN
CH[01]:
Channel
EFFECTS
Page16: MOD FX
Page17: DELAY FX
Page18: EQ
ARPEGGIATOR
Page19: ARPEGGIO
UTILITY
Page20: UTILITY
Parameter Guide
CNT
Pan
51