Konica Minolta MS6000 MKII User Manual page 71

2-42
25. Replacing the Projection Lamp
Insert a new Projection Lamp so that
4
the mark on its base is facing
upwards. Make sure that the new
Projection Lamp is inserted securely
so that there is no gap between the
Projection Lamp and the Lamp
Socket.
NOTE
Do not touch the reflector mirror surface
of the Projection Lamp. Fingerprints,
smudges or debris should be wiped clean
with a soft, dry cloth.
Insert the new Projection Lamp all
5
the way into the Lamp Holder.
Slide the Projection Unit back into
6
the scanner.
NOTE
If the Projection Unit is not properly
installed, power will not be supplied and
the scanner will not operate.
Mark
Turn the Power Switch ON.
7