Image 4-8
Top cover: right screw
2. Lift the top cover to remove it
Image 4-9
Top cover: lift to remove
4.4
Installation of the RGB/video input board
The procedure below describes how to install the optional input board in the second slot, but the procedure
to install it in the other free slot is similar.
Necessary tools
Torx screwdriver T10
How to install the optional RGB/video input board?
1. Remove the blanc cover plate by unscrewing both fixing screws
R5976888 RGB/VIDEO INPUT KIT 30/07/2008
4. Installing the RGB/video input on NH-12 and Galaxy NH-12
25