Removing The Top Cover - Barco iCon H600 Installation Manual

4. Installing the RGB/video input on NH-12 and Galaxy NH-12
Image 4-2
Rear cover: fixing screw
2. Lift the back side of the rear cover and pull it backward to remove it
Image 4-3
Tilt the back side of the rear cover
4.3

Removing the top cover

Necessary tools
Phillips screwdriver Ph2
How to remove the top cover?
1. Remove the four fixing screws
- two at the front side of the projector
- one at the left side
- one at the right side
Image 4-6
Top cover: front screws
24
Image 4-4
Pull the rear cover backward
Image 4-7
Top cover: left screw
Image 4-5
Rear cover removed
R5976888 RGB/VIDEO INPUT KIT 30/07/2008