Kodak RP 30 Operator's Manual page 223

6. Clean the hinged guide grids (see Figure) with a damp cloth to remove all
chemical deposits (crystalline sheet bridge deposits).
7. Carefully mount / clip in the guide grids.
8. Finally mount the bracket with the feed roller set on the rack.
9. Check the smooth movement of the rack by turning the handle (4) (see previous
Figure).
10. Push the dryer rack in the dryer cabinet and fasten it with the knurled screw.
11. Put back the covers.
Turn the locks through 90°; push them in up to the locking point.
KODAK PROFESSIONAL RP 30 Laser Printer
Maintenance
8-31