Stopping A Print Operation; Feeding The Tape; Cutting The Tape - Casio KL-P350W User Manual

Stopping a Print Operation

To interrupt an ongoing print operation, press
• After printing stops, cut the tape manually. For information about how to cut tape, see

"Cutting the Tape".

Feeding the Tape

You can perform a tape feed operation either before or after printing.
1.
Press .
• This will feed the tape by a fixed amount.
Cutting the Tape
Normally, the printer will cut the tape automatically after printing is complete. You can
also cut the tape manually as required.
1.
Press .
• This feeds the tape a fixed amount and then cuts it.
Important!
• Depending on the type of tape you are printing, use of the cutter can cause cutter
wear and malfunction. When printing on the tape types listed below, make sure that
No Cut is specified for Cut Style.
- Reflective tape
- Iron on tape
- Heat-shrinkable tubing
After printing is complete, press
.
to feed the tape and then use scissors to cut it.
27