Trane CVRD Installation Manual page 7

Hide thumbs Also See for CVRD:

Table of Contents

Installation

Figure 2. Panel assembly detail

Assemble the two backpanels using the standoffs and screws provided. The

standoffs must be attached to the bottom panel before it can be mounted in the

starter panel.

First wire the connections between the LLIDs and components on the backpanels

and the terminal block, 2X1 according to the following table. Note this wiring could

be done prior to arrival on jobsite.

PART-SVN82C-EN

Table of Contents

Kit09437 Cvhe