Settings For The Entire Unit; Ä Accessing The Menu Screen; Editing The Scene Settings (Scene Edit); Editing The I-Arpeggio Settings (Arpeggio Edit) - Roland JUNO-X Reference Manual

Settings for the Entire Unit

Accessing the MENU Screen
1 .
Press the [MENU] (WRITE) button .
2 .
Use the [ÇSELECTÉ] knob to select the parameter you wish to set, and then press the [ENTER] (INIT) button .
3 .
Use the [ÇSELECTÉ] knob to select the parameter, and use the [- VALUE +] knob to change the value .
Editing the Scene Settings
1 .
Press the [MENU] (WRITE) button .
2 .
Use the [ÇSELECTÉ] knob to select "SCENE EDIT,"
and then press the [ENTER] (INIT) button .
The SCENE COMMON EDIT screen appears.
This is the same screen as when you press the [Ë] button once
from the SCENE TOP screen.
To edit other scene settings, press the [Ë] button several times.
3 .
Use the [ÇSELECTÉ] knob to select the parameter,
and use the [- VALUE +] knob to change the value .
4 .
If you want to save the setting, execute the Scene
Write operation .
4-1 .
Hold down the [SHIFT] button and press the [MENU] (WRITE)
button.
The WRITE MENU screen appears.
4-2 .
Use the [ÇSELECTÉ] knob to select "SCENE," and then press
the [ENTER] (INIT) button.
4-3 .
Use the [ÇSELECTÉ] knob and the [- VALUE +] knob to select
the save-destination, and then press the [ENTER] (INIT) button.
If you want to rename the scene that's being saved, use the [Í] [Ë]
buttons to move the cursor and use the [- VALUE +] knob to specify
characters.
4-4 .
Press the [ENTER] (INIT) button.
4-5 .
To execute, press the [ENTER] (INIT) button.
Editing the I-ARPEGGIO Settings
1 .
Press the [MENU] (WRITE) button .
2 .
Use the [ÇSELECTÉ] knob to select "ARPEGGIO EDIT,"
and then press the [ENTER] (INIT) button .
The ARPEGGIO PART EDIT screen appears.
This is the same screen as when you press the [Í] button twice
from the SCENE TOP screen.
Use the [PART/FUNC] button to select the part whose arpeggio
parameters you want to edit, and then edit the parameters.
42
(SCENE EDIT)
(ARPEGGIO EDIT)
If you want to edit the ARPEGGIO COMMON EDIT settings, press
the [Ë] button once.
3 .
Use the [ÇSELECTÉ] knob to select the parameter,
and use the [- VALUE +] knob to change the value .
4 .
If you want to save the setting, execute the Scene
Write operation .
4-1 .
Hold down the [SHIFT] button and press the [MENU] (WRITE)
button.
The WRITE MENU screen appears.
4-2 .
Use the [ÇSELECTÉ] knob to select "SCENE," and then press
the [ENTER] (INIT) button.
4-3 .
Use the [ÇSELECTÉ] knob and the [- VALUE +] knob to select
the save-destination, and then press the [ENTER] (INIT) button.
If you want to rename the scene that's being saved, use the [Í] [Ë]
buttons to move the cursor and use the [- VALUE +] knob to specify
characters.
4-4 .
Press the [ENTER] (INIT) button.
4-5 .
To execute, press the [ENTER] (INIT) button.
Editing the Tone Settings
1 .
Press the [MENU] (WRITE) button .
2 .
Use the [ÇSELECTÉ] knob to select "TONE EDIT," and
then press the [ENTER] (INIT) button .
The TONE COMMON EDIT screen appears.
This is the same screen as when you press the [Ë] button once
from the MODEL BANK screen.
To edit other tone settings, press the [Ë] button several times.
3 .
Use the [ÇSELECTÉ] knob to select the parameter,
and use the [- VALUE +] knob to change the value .
4 .
If you want to save the setting, execute the Tone Write
operation .
4-1 .
Hold down the [SHIFT] button and press the [MENU] (WRITE)
button.
The WRITE MENU screen appears.
4-2 .
Use the [ÇSELECTÉ] knob to select the part where the tone
you want to save is assigned, and then press the [ENTER] (INIT)
button.
4-3 .
Use the [ÇSELECTÉ] knob and the [- VALUE +] knob to select
the save-destination, and then press the [ENTER] (INIT) button.
If you want to rename the tone that's being saved, use the [Í] [Ë] buttons
to move the cursor and use the [- VALUE +] knob to specify characters.
4-4 .
Press the [ENTER] (INIT) button.
4-5 .
To execute, press the [ENTER] (INIT) button.
(TONE EDIT)