Roland JUNO-X Reference Manual page 55

32
Can I prevent the I-Arpeggio TYPE and RHYTHM
from changing the sound or tempo?
Yes.
Proceed as follows.
1 .
Press the [MENU] (WRITE) button .
2 .
Select "SYSTEM," and then press the [ENTER] (INIT)
button .
3 .
Use the [ÇSELECTÉ] knob to select the following
ARPEGGIO parameters, and use the [- VALUE +] knob
to turn each "OFF . "
Set Tone
Set Drumkit
Set Tempo
4 .
To save the edited settings, hold down the [SHIFT]
button and press the [MENU] (WRITE) button .
5 .
When the screen asks, "SYSTEM WRITE Are you sure?,"
press the [ENTER] (INIT) button .
The screen indicates "Now writing..., " and you return to the
SYSTEM setting screen.
33
Can the I-Arpeggio synchronize with the tempo
of an external sequencer?
Yes.
In SYSTEM settings, set the TEMPO/SYNC parameters as appropriate
for your situation.
Ø "Parameter Guide" (PDF)
34
Can I connect an external MIDI keyboard
and use it for keyboard performance with
I-Arpeggio?
Yes.
Make remote keyboard settings as follows.
1 .
Press the [MENU] (WRITE) button .
2 .
Select "SYSTEM," and then press the [ENTER] (INIT)
button .
3 .
Use the [ÇSELECTÉ] knob to select "MIDI: Remote
Kbd . "
4 .
Use the [- VALUE +] knob to select the connector/port
to which you connect your external MIDI keyboard .
You can select "MIDI IN," "USB COM" or "USB MEM . "
5 .
To save the edited settings, hold down the [SHIFT]
button and press the [MENU] (WRITE) button .
6 .
When the screen asks, "SYSTEM WRITE Are you sure?,"
press the [ENTER] (INIT) button .
The screen indicates "Now writing..., " and you return to the
SYSTEM setting screen.
Q&A
55