Switching Display For Discs; Fast Forwarding And Reversing Disc Play - Kenwood DPX-4010 Instruction Manual

Switching Display for Discs

Switch the display that appears while discs are playing.
Switching Display for Discs:
Each time you press the DISP button, the display during disc
play switches as follows:
Track time
Total disc playing time (CD only)
Disc name (DNPS) (CD only)
Disc title* (Units featuring CD text/MD only)
Track title* (Units featuring CD text/MD only)
Character
Clock
NOTE
• You can give names to discs through the presetting disc name
function (see p. 21).
Note that depending on the unit, display may not be possible.
• If you try to display the name of a disc that doesn't have one,
"No Name" is displayed instead.
• When an attempt is made to display the title of a disc for which
a disc title/track title has not been recorded, the CD will display
"No Text" , and an MD changer will display "No Title".
• Depending on the type of characters of the CD Text, some
characters may not be displayable.

Fast Forwarding and Reversing Disc Play

Fast Forwarding Disc Play:
Hold down on the ¢ button.
Release your finger to play the disc at that point.
Reversing Disc Play:
Hold down on the 4 button.
Release your finger to play the disc at the point.
NOTE
You cannot use reverse play between tracks depending on the
model being connected. Instead, the reverse play function is
canceled when it reaches the beginning of a track, at which point
normal play will automatically resume.
(*: For disc changers)
— 17 —